Datasheet4U Logo Datasheet4U.com

MAX5101 - +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC

General Description

The MAX5101 parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 16-pin TSSOP package.

Internal precision buffers swing Rail-to-Rail®.

For all three DACs, the internal reference voltage is tied to VDD.

Key Features

  • a 1µA software shutdown mode, as well as a power-on reset mode that resets all registers to code 00 hex on power-up. o Ultra-Low Supply Current 0.3mA while Operating 1µA in Software Shutdown Mode o Ultra-Small 16-Pin TSSOP Package o Output Buffer Amplifiers Swing Rail-to-Rail o Power-On Reset Sets All Registers to Zero Features o +2.7V to +5.5V Single-Supply Operation MAX5101.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated
MAX5121 Serial Voltage-Output DACs Maxim Integrated
MAX5123 Force/Sense DACs Maxim Integrated
MAX5128 Linear-Taper Digital Potentiometer Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX510 Quad / Serial 8-Bit DACs
MAX5100 +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5102 +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5104 Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface
MAX5105 Nonvolatile / Quad / 8-Bit DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1560; Rev 0; 10/99 +2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs General Description The MAX5101 parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 16-pin TSSOP package. Internal precision buffers swing Rail-to-Rail®. For all three DACs, the internal reference voltage is tied to VDD. The MAX5101 has separate input latches for each of its three DACs. Data is transferred to the input latches from a common 8-bit input port. The DACs are individually selected through address inputs A0 and A1 and are updated by bringing WR low.