Datasheet4U Logo Datasheet4U.com

MAX563 - +3.3V-Powered / EIA/TIA-562 Dual Transceiver with Receivers Active in Shutdown

Description

The MAX563 is a +3.3V-powered EIA/TIA-562 transceiver with two transmitters and two receivers.

Because it implements the EIA/TIA-562 standard, the MAX563 communicates with RS-232 transceivers, yet consumes far less power; this makes it ideal for battery-powered, hand-held computers.

Features

  • o Guaranteed Interoperability with RS-232 o Operates from a Single +3.0V to +3.6V Supply o 2 Drivers, 2 Receivers o Receivers Active in Shutdown Mode o Low-Power Shutdown: 10µA Max o Small Package.
  • 18-Pin Wide SO o Three-State TTL/CMOS Receiver Outputs o 116kbps Guaranteed Data Rate MAX563 ______________Ordering Information PART MAX563CPN MAX563CWN MAX563C/D TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C PIN-.

📥 Download Datasheet

Datasheet preview – MAX563

📁 Similar Datasheet

  • MAX5661 - Single 16-Bit DAC (Maxim Integrated)
  • MAX5014 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5015 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5033 - MAXPower Step-Down DC-DC Converter (Maxim Integrated)
  • MAX5041 - Dual-Phase / Parallelable / Average Current-Mode Controllers (Maxim Integrated)
  • MAX5041A - Dual-Phase / Parallelable / Average-Current-Mode Controllers (Maxim Integrated)
  • MAX5042 - Two-Switch Power-IC (Maxim Integrated)
  • MAX5043 - Two-Switch Power-IC (Maxim Integrated)
  • MAX5048C - MOSFET Driver (Maxim Integrated)
  • MAX5051 - Parallelable Clamped Two-Switch Power-Supply Controller IC (Maxim Integrated Products)
Other Datasheets by Maxim
  • MAX560 - +3.3V Transceiver with Wow EIA/TIA-562 Receivers Active in Shutdown
  • MAX561 - +3.3V Transceiver
  • MAX562 - Complete 230kbps / 2.7V to 5.25V Serial Interface for Notebook Computers
  • MAX5679 - Digitally Programmable LCD Gamma Reference Generator
  • MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC
  • MAX5003 - High-Voltage PWM Power-Supply Controller
  • MAX501 - Voltage-Output / 12-Bit Multiplying DACs
  • MAX5012 - 12-Bit / 100Msps ECL DAC

Full PDF Text Transcription

Click to expand full text
19-0198; Rev 0; 10/93 +3.3V-Powered, EIA/TIA-562 Dual Transceiver with Receivers Active in Shutdown _______________General Description The MAX563 is a +3.3V-powered EIA/TIA-562 transceiver with two transmitters and two receivers. Because it implements the EIA/TIA-562 standard, the MAX563 communicates with RS-232 transceivers, yet consumes far less power; this makes it ideal for battery-powered, hand-held computers. And, the MAX563 guarantees a 116kbps data rate while maintaining ±3.7V EIA/TIA-562 signal levels, which makes it compatible with LapLink™ software. An on-board charge pump converts the +3.3V supply to the ±6.6V needed to produce the EIA/TIA-562 output voltage levels. Four 0.
Published: |