Datasheet4U Logo Datasheet4U.com

MAX5679 - Digitally Programmable LCD Gamma Reference Generator

Description

The MAX5679 digitally programmable LCD gamma reference generator provides 18 buffered channels for biasing LCD column drivers.

Features

  • a digitally programmable voltage reference (DVR) with 7-bit adjustable current sink to set the LCD common backplane (VCOM) voltage. The MAX5679 includes a power-on reset (POR) function that configures all 14 programmable gamma outputs to predetermined levels upon initial power-up. The MAX5679 is available in a 5mm x 5mm, 32-pin TQFN package and is specified over the -40°C to +85°C extended temperature range. Features.
  • 7-Bit Adjustable VCOM Calibrator (DVR).
  • 14 Programmable Gam.

📥 Download Datasheet

Datasheet preview – MAX5679

📁 Similar Datasheet

  • MAX5661 - Single 16-Bit DAC (Maxim Integrated)
  • MAX5014 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5015 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5033 - MAXPower Step-Down DC-DC Converter (Maxim Integrated)
  • MAX5041 - Dual-Phase / Parallelable / Average Current-Mode Controllers (Maxim Integrated)
  • MAX5041A - Dual-Phase / Parallelable / Average-Current-Mode Controllers (Maxim Integrated)
  • MAX5042 - Two-Switch Power-IC (Maxim Integrated)
  • MAX5043 - Two-Switch Power-IC (Maxim Integrated)
  • MAX5048C - MOSFET Driver (Maxim Integrated)
  • MAX5051 - Parallelable Clamped Two-Switch Power-Supply Controller IC (Maxim Integrated Products)
Other Datasheets by Maxim
  • MAX560 - +3.3V Transceiver with Wow EIA/TIA-562 Receivers Active in Shutdown
  • MAX561 - +3.3V Transceiver
  • MAX562 - Complete 230kbps / 2.7V to 5.25V Serial Interface for Notebook Computers
  • MAX563 - +3.3V-Powered / EIA/TIA-562 Dual Transceiver with Receivers Active in Shutdown
  • MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC
  • MAX5003 - High-Voltage PWM Power-Supply Controller
  • MAX501 - Voltage-Output / 12-Bit Multiplying DACs
  • MAX5012 - 12-Bit / 100Msps ECL DAC

Full PDF Text Transcription

Click to expand full text
19-4058; Rev 0; 3/08 Digitally Programmable LCD Gamma Reference Generator with Digital Voltage Reference General Description The MAX5679 digitally programmable LCD gamma reference generator provides 18 buffered channels for biasing LCD column drivers. The device provides 14 outputs of 8-bit programmable gamma reference voltage derived from four externally applied reference voltages, and four buffered outputs of the same externally applied reference voltages. An I2C serial interface programs the 14 upper and lower range gamma buffer outputs independently. The MAX5679 features a digitally programmable voltage reference (DVR) with 7-bit adjustable current sink to set the LCD common backplane (VCOM) voltage.
Published: |