SY89295U Datasheet | Micrel Semiconductor

2.5V/3.3V 1.5GHz Precision LVPECL Programmable Delay General Description The SY89295U is a programmable delay line that delays the input signal using a digital control signal. The delay can vary from 3.2ns to 14.8ns in 10ps increments. In addition, the input signal is LVPECL, uses either a 2.5V ±5% or 3.3V ±10% power supply, and is guaranteed over the full industrial temperature range (- 40°C to +85°C). The delay varies in discrete steps based on a control word. The control word is 10-bits long and controls the delay in 10ps increments. The eleventh bit is D[10] and is used to simultaneously cascade the SY89295U which allows for a larger delay range. In addition, the input pins IN and /IN default to an equivalent low state when left floating. Further, for maximum flexibility, the control register interface accepts CMOS or TTL level signals. For applications that require an analog delay input, see the SY89296L which is a programmable delay chip with fine tune control. The SY89295U and SY89296U are part of Micrel’s high-speed, Precision Edge® product line. Data sheets and support documentation can be found on Micrel’s web site at: .micrel.. Features Precision Edge® - Precision LVPECL programmable delay line - Guaranteed AC performance over temperature and voltage: - >1.5GHz f MAX - <160ps rise/fall times - Low-jitter design: - <10ps PP total jitter - <2ps RMS cycle-to-cycle jitter - <1ps RMS random jitter - Programmable delay range: 3.2ns to 14.8ns in 10ps increments - Increased monotonicity over the MIC100EP195 - ±10ps INL - VBB output reference voltage - Parallel inputs accepts LVPECL or CMOS/LVTTL - Low voltage operation: 2.5V ±5% and 3.3V ±10% - Industrial - 40°C to +85°C temperature range - Available in 32-pin (5mm × 5mm) MLF® and 32-pin TQFP packages Applications - Clock de-skewing - Timing adjustments - Aperture...