SY89321L Datasheet | Micrel Semiconductor

FEATURES s 3.3V power supply s 1.9ns typical propagation delay s 275MHz f MAX s Differential LVPECL/CML/LVDS inputs s 24m A LVTTL outputs s Flow-through pinouts s Internal input resistors: pulldown on IN, pulldown and pullup on /IN s Q output will default LOW with inputs open s VBB output s Available in ultra-small 8-pin MLF® (2mm x 2mm) package BLOCK DIAGRAM LVPECL/ IN CML/LVDS /IN Q LVTTL Precision Edge® DESCRIPTION The SY89321L is a differential LVPECL/CML/LVDSto-LVTTL translator requiring only a single +3.3V power. The SY89321L is functionally equivalent to the SY100EPT21L, but in an ultra-small 8-pin MLF® package that features a 70% smaller footprint. This ultra-small package and low skew single gate design make the SY89321L ideal for applications that require the translation of a clock or data signal where minimal space, low power and low cost are critical. VBB allows a differential, single-ended, or AC-coupled interface to the device. If used, the VBB output should be bypassed to VCC with 0.01µF capacitor. Under open input conditions, the /IN will be biased at a VCC/2 voltage level and the IN input will be pulled to ground. This condition will force the Q output low to provide added stability. The SY89321L is patible with positive ECL 100k logic levels. Precision Edge is a registered trademark of Micrel, Inc. Micro Lead Frame and MLF are registered trademarks of Amkor Technology, Inc. M9999-060208 hbwhelp@micrel. or (408) 955-1690 Rev.: D Amendment: /0 Issue Date: June 2008 Micrel, Inc. Precision Edge® SY89321L PACKAGE/ORDERING INFORMATION NC 1 IN 2 8 VCC LVTTL 7Q /IN 3 6 NC LVPECL/CML/LVDS VBB 4 5 GND 8-Pin MLF® Ultra-Small Outline (2mm x 2mm) Ordering Information Part Number SY89321LMITR SY89321LMGTR(1) Package Type MLF-8 MLF-8 Operating Range Industrial Industrial Package Marking 321 with Pb-Free bar-line indicator Lead Finish Sn-Pb Pb-Free Ni Pd...