Datasheet4U Logo Datasheet4U.com

M56789FP - 4 CHANNEL ACTUATOR DRIVER

General Description

The M56789FP is a semiconductor integrated circuit in order to drive 4ch actuator.

Key Features

  • q Large power dissipation (Power Package). q 3.3V DSP available. q Low saturation voltage (typical 0.6V at load current 500mA). q Low cross-over distortion. q Wide supply voltage range. (4.5V.
  • 13.2V) q Divided Motor power supplies into three parts. q Ch1, Ch2 and Ch3 can be controlled by PWM. q Ch1 and Ch2 can act in the Current Control mode. q Two naked Operational Amplifiers. q TSD(Thermal Shut Down) circuit. q Two mute circuits. M56789FP 9 10 11 12 13 14 15 16 17 18 19 20 34 33 32 31.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M56710FP F2F Magnetic Stripe Encoding Card Reader Renesas Technology
M56733AFP 3-Phase Brushless Motor Driver Renesas
M56750FP 3-PHASE BRUSHLESS MOTOR DRIVER Hitachi
M56760FP PLL Frequency Synthesizer Mitsubishi Electric
M5600 Wireless Pressure Transducer TE

Other Datasheets by Mitsubishi Electric

Part Number Description
M56781FP 2-CHANNEL ACTUATOR MOTOR DRIVER
M56782FP 4 CHANNEL ACTUATOR DRIVER
M56783AFP 3 CHANNEL ACTUATOR DRIVER
M56784FP SPINDLE MOTOR DRIVER
M56785FP SPINDLE MOTOR DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI M56789FP 4 CHANNEL ACTUATOR DRIVER DESCRIPTION The M56789FP is a semiconductor integrated circuit in order to drive 4ch actuator. PIN CONFIGURATION (TOP VIEW) MUTE2 MUTE1 SOUT2 SIN2IN2+ IN2GND OUT2 VM2VM2+ 1 2 3 4 5 6 7 8 42 41 40 39 38 37 36 35 VCC2 VREF VREFO IN3IN3+ Vm3 OUT3 VM3VM3+ GND VM4+ VM4IN4AGND Vm2 IN4BOP1OUT OP1OP1+ OP2+ OP2- FEATURES q Large power dissipation (Power Package). q 3.3V DSP available. q Low saturation voltage (typical 0.6V at load current 500mA). q Low cross-over distortion. q Wide supply voltage range.(4.5V–13.2V) q Divided Motor power supplies into three parts. q Ch1, Ch2 and Ch3 can be controlled by PWM. q Ch1 and Ch2 can act in the Current Control mode. q Two naked Operational Amplifiers. q TSD(Thermal Shut Down) circuit.