MT830 Datasheet | NEC

LCD PROJECTOR .. Multi Sync MT830/1030 USER'S MANUAL English Deutsch Françe Español Italiano Svenska Multi Sync MT830/MT1030 LCD Projector User’s Manual .. English IMPORTANT INFORMATION Precautions Please read this manual carefully before using your NEC Multi Sync MT830/1030 LCD Projector and keep the manual handy for future reference. Your serial number is located under the name plate label on the right side of your Multi Sync MT830/1030 . Record it here: Important Safeguards These safety instructions are to ensure the long life of your LCD projector and to prevent fire and shock. Please read them carefully and heed all warnings. Installation 1. For best results, use your LCD projector in a darkened room. 2. Place the projector on a flat, level surface in a dry area away from dust and moisture. 3. Do not place your LCD projector in direct sunlight, near heaters or heat radiating appliances. 4. Exposure to direct sunlight, smoke or steam can harm internal ponents. 5. Handle your LCD projector carefully. Dropping or jarring can damage internal ponents. 6. Do not place heavy objects on top of the LCD projector. 7. If installing the LCD projector on the ceiling: a. The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local building codes. b. The LCD projector must be installed by qualified NEC service personnel. CAUTION LASER RADIATIONDO NOT STARE INTO BEAM WAVE LENGTH: 645 nm (640-660 nm) MAX. OUTPUT: 1 m W .. CLASS II LASER PRODUCT WARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE PONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED NEC SERVICE PERSONNEL. Power Supply 1. The LCD projector is designed to operate on a power supply of 100120 or 220-240 V 50/60 Hz AC. Ensure that your power supply fits...