Datasheet4U Logo Datasheet4U.com

UPD16311 - 1/8- to 1/16-DUTY FIPTM VFD CONTROLLER/DRIVER

General Description

Inputs serial data at rising edge of shift clock, starting from lower bit.

Outputs serial data at falling edge of shift clock, starting from lower bit.

This is N-ch open-drain output pin.

Key Features

  • Many display modes (12-segment & 16-digit to 20-segment & 8-digit).
  • Key scanning (12  4 matrices).
  • Dimming circuit (eight steps).
  • High-voltage output (VDD 35 V max).
  • LED ports (5 chs. , 20 mA max).
  • General-purpose input port (4 bits).
  • No external resistor necessary for driver outputs (P-ch open-drain + pull-down resistor output).
  • Serial interface (CLK, STB, DIN, DOUT).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET SHEET DATA MOS INTEGRATED CIRCUIT PD16311 1/8- to 1/16-DUTY FIPTM (VFD) CONTROLLER/DRIVER The PD16311 is a FIP (Fluorescent Indicator Panel or Vacuum Fluorescent Display) controller/driver that is driven on a 1/8- to 1/16 duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output drive lines, a display memory, a control circuit, and a key scan circuit. Serial data is input to the PD16311 through a three-line serial interface. This FIP controller/driver is ideal as a peripheral device of a single-chip microcomputer. FEATURES • Many display modes (12-segment & 16-digit to 20-segment & 8-digit) • Key scanning (12  4 matrices) • Dimming circuit (eight steps) • High-voltage output (VDD  35 V max). • LED ports (5 chs., 20 mA max).