Datasheet4U Logo Datasheet4U.com

2N6028 - Programmable Unijunction Transistor

General Description

Designed to enable the engineer to “program” unijunction characteristics such as RBB, , IV, and IP by merely selecting two resistor values.

trigger, oscillator, pulse and timing circuits.

Key Features

  • D Programmable.
  • RBB, , IV, and IP D Low On.
  • State Voltage.
  • 1.5V Maximum @ IF = 50mA D Low Gate.
  • to.
  • Anode Leakage Current.
  • 10nA Maximum D High Peak Output Voltage.
  • 11V Typical D Low Offset Voltage.
  • 0.35V Typical (RG = 10kW) Absolute Maximum Ratings: (TJ = +25C, Note 1 unless otherwise specified) Power Dissipation, PF.
  • . . . . 300mW.

📥 Download Datasheet

Datasheet Details

Part number 2N6028
Manufacturer NTE Electronics (defunct)
File Size 63.05 KB
Description Programmable Unijunction Transistor
Datasheet download datasheet 2N6028 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
2N6028 Programmable Unijunction Transistor ON Semiconductor
2N6028 SILICON PROGRAMMABLE UNIJUNCTION TRANSISTORS Central Semiconductor
2N6027 Programmable Unijunction Transistor ON Semiconductor
2N6027 PROGRAMMABLE UNIJUNCTION TRANSISTOR UTC
2N6027 SILICON PROGRAMMABLE UNIJUNCTION TRANSISTORS Central Semiconductor

Other Datasheets by NTE Electronics (defunct)

Part Number Description
2N6052 Silicon PNP Transistor
2N6057 Silicon NPN Transistor
2N6059 Silicon NPN Transistor
2N6107 Silicon PNP Transistor
2N6109 Silicon PNP Transistor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
2N6028 Programmable Unijunction Transistor Description: Designed to enable the engineer to “program” unijunction characteristics such as RBB, , IV, and IP by merely selecting two resistor values. Applications include thyristor−trigger, oscillator, pulse and timing circuits. This device may also be used in special thyristor applications due to availability of an anode gate. Supplied in an inexpensive TO−92 type plastic package for high−volume requirements, this package is readily adaptable for use in automatic insertion equipment. Features: D Programmable − RBB, , IV, and IP D Low On−State Voltage − 1.5V Maximum @ IF = 50mA D Low Gate−to−Anode Leakage Current − 10nA Maximum D High Peak Output Voltage − 11V Typical D Low Offset Voltage − 0.