JN5178 Datasheet | NXP Semiconductors

JN517x JN517x IEEE802.15.4 Wireless Microcontroller Rev. 3.0 - 7 November 2017 Product data sheet 1. General description The JN517x series is a range of ultra low power, high performance wireless microcontrollers suitable for Zig Bee applications to facilitate the development of Smart Home and Smart Lighting applications. It Features a high-performance and low-power ARM Cortex-M3 processor with debug with programmable clock speeds. The JN517x devices are available in JN5174, JN5178 and JN5179 variants, respectively having 160 k B, 256 k B and 512 k B of embedded Flash memory as well as 32 k B of RAM and 4 k B of EEPROM. The embedded Flash can support “Over-The-Air” code download of software stacks. Radio transmit power is configurable up to +10 d Bm output. The very-low receive operating current (down to 12.7 m A and with a 0.6 A sleep timer mode) gives excellent battery life allowing operation direct from a coin cell. The JN517x also includes a 2.4 GHz “IEEE802.15.4 pliant” transceiver and a prehensive mix of analog and digital peripherals. The JN517x is ideal for battery-operated applications supported through the prehensive power-saving modes available in the device. The on-chip peripherals, which include a fail-safe I2C-bus, SPI-bus ports (both master and slave), and a six-channel analog-digital converter with internal temperature sensor support a wide range of applications directly without extra hardware. 2. Features and benefits 2.1 Benefits - Very low current solution for long battery life: over 10 years - Very low receive current for low standby power of receiver always on nodes - Integrated power amplifier for long range and robust munication - Large embedded Flash memory to enable Over-The-Air (OTA) firmware updates without external Flash memory - Single chip device to run munication stack and application - Supports multiple network stacks - Peripherals customized for lighting applications - System BOM is low in ponent count and cost -...