PN5180A0ETC4QL Datasheet | NXP Semiconductors

PN5180A0xx/C3,C4 High-performance multiprotocol full NFC frontend, supporting all NFC Forum modes Rev. 4.1 - 13 March 2023 Product data sheet 1 Introduction This document describes the functionality and electrical specification of the high-power NFC IC PN5180A0HN/ C3, PN5180A0ET/C3 with firmware versions equal or higher than FW3.A and PN5180A0HN/C4, PN5180A0ET/ C4 with firmware versions equal or higher than FW4.1. The package description of the PN5180A0ET/C3 and PN5180A0ET/C4 is described in an addendum to this document. Additional documents supporting a design-in of the PN5180 are available from NXP, this additional design-in information is not part of this document. NXP Semiconductors PN5180A0xx/C3,C4 High-performance multiprotocol full NFC frontend, supporting all NFC Forum modes 2 General description As a highly integrated high performance full NFC Forum-pliant frontend IC for contactless munication at 13.56 MHz, this frontend IC utilizes an outstanding modulation and demodulation concept pletely integrated for different kinds of contactless munication methods and protocols. The PN5180 ensures maximum interoperability for next generation of NFC enabled mobile phones. The PN5180 is optimized for point of sales terminal applications and implements a high-power NFC frontend functionality which allows to achieve EMV pliance on RF level without additional external active ponents. The PN5180 frontend IC supports the following RF operating modes: - Reader/Writer mode supporting ISO/IEC 14443 type A up to 848 k Bit/s - Reader/Writer munication mode for MIFARE Classic contactless IC - Reader/Writer mode supporting ISO/IEC 14443 type B up to 848 k Bit/s - Reader/Writer mode supporting JIS X 6319-4 (parable with Feli Ca scheme) - Supports reading of all NFC tag types (type 1, type 2, type 3, type 4A and type 4B) - Reader/Writer mode supporting ISO/IEC 15693 - Reader/Writer mode supporting ISO/IEC 18000-3 Mode 3 - ISO/IEC 18092 (NFC-IP1) -...