Datasheet4U Logo Datasheet4U.com

SA600 - 1Ghz LNA and Mixer

General Description

The NE/SA600 is a combined low noise amplifier (LNA) and mixer designed for high-performance low-power communication systems from 800-1200MHz.

The low-noise preamplifier has a 2dB noise figure at 900MHz with 16dB gain and an IM3 intercept of -10dBm at the input.

Key Features

  • SR00082 Figure 1. Pin Configuration.
  • Excellent noise figure: 2dB for the amplifier and 14dB for the mixer at 900MHz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA60 AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS MIC
SA60 Transient Voltage Suppression (TVS) Diodes Crydom
SA60 Transient Voltage Suppressors Microsemi
SA60 TRANSIENT VOLTAGE SUPPRESSORS Digitron Semiconductors
SA60 Transient Voltage Suppressors Crownpo

Other Datasheets by NXP Semiconductors

Part Number Description
SA602A Double-balanced mixer and oscillator
SA604A High-performance low-power FM IF system
SA605 High performance low power mixer FM IF system
SA606 Low-voltage high performance mixer FM IF system
SA612A Double-balanced mixer and oscillator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Philips Semiconductors Product specification 1GHz LNA and mixer NE/SA600 DESCRIPTION The NE/SA600 is a combined low noise amplifier (LNA) and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a 2dB noise figure at 900MHz with 16dB gain and an IM3 intercept of -10dBm at the input. Input and output impedances are 50Ω and the gain is stabilized by on-chip compensation to vary less than ±0.5dB over the -40 to +85°C temperature range. The wide-dynamic-range mixer has a 14dB noise figure and IM3 intercept of +6dBm at the input at 900MHz. Mixer input impedance is 50Ω with an open-collector output. The chip incorporates an option so the LNA can be disabled and replaced by a through connection.