TZA3000 Datasheet | NXP Semiconductors

FEATURES - Low equivalent input noise, typically 3.5 p A/√Hz - Wide dynamic range, typically 1 µA to 1.5 m A - On-chip low-pass filter. The bandwidth can be varied between 370 and 600 MHz using an external resistor. Default value is 470 MHz. - Differential transimpedance of 1.8 MΩ - On-chip AGC (Automatic Gain Control) - PECL (Positive Emitter-Coupled Logic) or CML (Current-Mode Logic) patible data outputs - LOS (Loss-Of-Signal) detection - LOS threshold level can be adjusted using a single external resistor - On-chip DC offset pensation - Single supply voltage from 3.0 to 5.5 V - Bias voltage for PIN diode. ORDERING INFORMATION TYPE NUMBER TZA3000HL TZA3000U PACKAGE NAME LQFP32 naked die DESCRIPTION plastic low profile quad flat package; 32 leads; body 5 × 5 × 1.4 mm die in waffle pack carriers; die dimensions 1.58 × 1.58 mm APPLICATIONS - Digital fibre optic receiver in short, medium and long haul optical telemunications transmission systems or in high speed data networks - Wideband RF gain block. DESCRIPTION The TZA3000 optical receiver is a low-noise transimpedance amplifier with AGC plus a limiting amplifier designed to be used in SDH/SONET fibre optic links. The TZA3000 amplifies the current generated by a photo detector (PIN diode or avalanche photodiode) and converts it to a differential output voltage. VERSION SOT401-1 - 1997 Oct 17 Philips Semiconductors Objective specification SDH/SONET STM4/OC12 optical receiver BLOCK DIAGRAM TZA3000 handbook, full pagewidth VCCA 2 2, 5 VCCD 2 17, 20 LOS DETECTION 29 28 LOSTH LOSTTL PECL peak detector 2 kΩ GAINCONTROL 26 27 LOS LOSQ DREF CML IPhoto 7 A1 A2 18 19 15 OUTCML OUTQCML OUTSEL OUTPECL...