Datasheet4U Logo Datasheet4U.com

LMH6502 - Wideband / Low Power / Linear-in-dB Variable Gain Amplifier

General Description

The LMH™6502 is a wideband DC coupled differential input voltage controlled gain stage followed by a high-speed current feedback Op Amp which can directly drive a low impedance load.

Gain adjustment range is more than 70dB for up to 10MHz.

Key Features

  • VS = ± 5V, TA = 25˚C, RF = 1kΩ, RG = 174Ω, RL = 100Ω, AV = AV(MAX) = 10 Typical values unless specified. n -3dB BW 130MHz n Gain control BW 100MHz n Adjustment range (typical over temp) 70dB ± 0.6dB n Gain matching (limit) n Slew rate 1800V/µs n Supply current (no load) 27mA ± 75mA n Linear output current ± 3.2V n Output voltage (RL = 100Ω) n Input voltage noise 7.7nV/ n Input current noise 2.4pA/ n THD (20MHz, RL = 100Ω, VO = 2VPP).
  • 53dBc n Replacement for CLC520.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMH6502 Wideband, Low Power, Linear-in-dB Variable Gain Amplifier June 2004 LMH6502 Wideband, Low Power, Linear-in-dB Variable Gain Amplifier General Description The LMH™6502 is a wideband DC coupled differential input voltage controlled gain stage followed by a high-speed current feedback Op Amp which can directly drive a low impedance load. Gain adjustment range is more than 70dB for up to 10MHz. Maximum gain is set by external components and the gain can be reduced all the way to cut-off. Power consumption is 300mW with a speed of 130MHz. Output referred DC offset voltage is less than 350mV over the entire gain control voltage range. Device-to-device Gain matching is within ± 0.6dB at maximum gain. Furthermore, gain at any VG is tested and the tolerance is guaranteed.