PSH2-323-36AA Datasheet | Nippon Ceramic

MESSRS. : AGENT : SPECIFICATION of PYROELECTRIC PASSIVE INFRARED SENSOR MODEL NO. : PSH2-323-36AA APPROVED BY 176-17 Hirooka, Tottori-shi, 689-1193 JAPAN TEL : +81-857-53-4666 FAX : +81-857-53-3532 CHECKED BY DRAWN BY MODEL NO. : DRAWING NO. REV： PAGE PART NO.： A 1/8 に 1. SCOPE This specification describes a Pyroelectric Passive Infrared Sensor supplied by NIPPON CERAMIC CO.,LTD. for passive infrared sensor device. 2. TYPE of SENSOR 2.1. TYPE NAME Pyroelectric Passive Infrared Sensor 2.2. MODEL NO. PSH2-323-36AA 3. PHYSICAL CONFIGURATION AND DIMENSIONS 3.1. APPEARANCE There are not remarkable wounds, spots, rust and etc. 3.2. DIMENSIONS TO-5 Package : See Fig.1. 3.3. MARKING Lot number and model number are marked on top surface of detector.（Figure.1） 【Lot number】 To show last one digit of the A.D. year and week of the year of a inspection pletion、 Nicera Identification code. Example： ４ ２６ Ｂ 【Model number】 ”PSH2” is marked. 4. GENERAL CHARACTERISTICS PARAMETER 4.1. Pyroelectric Passive Infrared Sensor 4.2. Circuit Configuration Nicera Identification code 26th week Year 2014 SPECIFICATION Balanced differential type (Series opposed type ) See Fig.3 Table.1 5. ELECTRICAL CHARACTERISTICS (ENVIRONMENT TEMPERATURE = 25 (+/-) 5 deg. C.) Vdd = 3.3 V, unless specified. PARAMETER CONDITION 5.1. Maximum range(V) 5.2. Supply Voltage(V) Single Power Supply 5.3. Fluctuation in Supply Single Power Supply Voltage 5.4. Current Consumption Vdd = 3.3V supply Circuit after Vout is not considered Table.2 SPECIFICATION -0.3 to 3.6 V 2.7 to 3.3 V (Maximum rating : 3.6 V) Supply voltage (+/-) 3 % Non-Detection : 20u Amax. Detection : 20u...