CS5205-2 Datasheet PDF - ON Semiconductor 5.0A 1.5V Fixed Linear Regulator Specs

CS5205-2 - 5.0A 1.5V Fixed Linear Regulator

Datasheet Summary

Description

Package Pin Number TO 220 3 D2PAK

Ground connection.

Regulated output voltage (case).

Input voltage.

2 1.30 1.25 1.20 1.15 1.1

Features

Output Current to 5.0 A.
Output Voltage Trimmed to ±2.0%.
Dropout Voltage 1.2 V @ 5.0 A.
Fast Transient Response.
Fault Protection Circuitry.
Thermal Shutdown.
Overcurrent Protection.
Safe Area Protection VOUT VIN Thermal Shutdown Bandgap Output Current Limit.
+ Error Amplifier Figure 1. Block Diagram GND http://onsemi. com 12 3 TO.
220.
3 T SUFFIX CASE 221A Tab = VOUT Pin 1. GND 2. VOUT 3. VI.

Datasheet Details

Part number	CS5205-2
Manufacturer	ON Semiconductor
File Size	193.78 KB
Description	5.0A 1.5V Fixed Linear Regulator
Datasheet	CS5205-2 Datasheet
Additional preview pages of the CS5205-2 datasheet.

📁 Similar Datasheet

CS5205-1 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5205-3 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5205-5 - 5A Adjustable/ and 3.3V and 5V Fixed Linear Regulators (Cherry Semiconductor Corporation)

CS5205A-1 - 5A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS5201-1 - 1A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS5201-3 - 1A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)

CS52015-1 - 1.5A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

CS52015-3 - 1.5A/ 3.3V Fixed Linear Regulator (Cherry Semiconductor Corporation)

CS5202 - CS5202 CMOS (ETC)

CS5203-1 - 3A Adjustable Linear Regulator (Cherry Semiconductor Corporation)

Full PDF Text Transcription

Click to expand full text

CS5205−2 5.0 A, 1.5 V Fixed Linear Regulator The CS5205−2 linear regulator provides 5.0 A @ 1.5 V with an accuracy of ±2.0%. The regulator is intended for use as an active termination for the GTL bus on Intel based motherboards. The fast loop response and low dropout voltage make these regulators ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load. The regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown. The CS5205−2 is available in TO−220−3 and surface mount D2PAK−3 packages.

Published: Mar 24, 2005 |