Datasheet4U Logo Datasheet4U.com

MC10EP32 - Divider

General Description

CLK inputs.

this device only.

For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage.

Key Features

  • 350 ps Typical Propagation Delay.
  • Maximum Frequency > 4 GHz Typical (Figure 3).
  • PECL Mode Operating Range:.
  • VCC = 3.0 V to 5.5 V with VEE = 0 V.
  • NECL Mode Operating Range:.
  • VCC = 0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10EP16 Differential Receiver Motorola
MC10E016 8-Bit Synchronous Binary Up Counter Motorola
MC10E101 Quad 4-Input OR/NOR Gate Motorola
MC10E104 QUINT 2-INPUT AND/NAND GATE Motorola
MC10E107 QUINT 2-INPUT XOR/XNOR GATE Motorola

Other Datasheets by onsemi

Part Number Description
MC10EP31 D Flip Flop
MC10EP33 Divider
MC10EP35 JK Flip Flop
MC10EP01 4-Input OR/NOR
MC10EP016 3.3V / 5VECL 8-Bit Synchronous Binary Up Counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MC10EP32, MC100EP32 3.3 V / 5 V ECL B2 Divider Description The MC10/100EP32 is an integrated B2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01ĂmF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flops will attain a random state; the reset allows for the synchronization of multiple EP32’s in a system. The 100 Series contains temperature compensation.