NB2762A Datasheet | onsemi

Features http://onsemi. MARKING DIAGRAM- TSOP-6 (TSOT-23-6) SN SUFFIX CASE 318G 6 1 E04AYWG G 1 E04 A Y W G = Specific Device Code = Assembly Location = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) - For additional marking information, refer to Application Note AND8002/D. - ăGenerates an EMI Optimized Clocking Signal at the Output - ăIntegrated Loop Filter ponents - ăOperates with a 3.3 V / 2.5 V Supply - ăOperating Current less than 3.0 m A - ăLow Power CMOS Design - ăInput Frequency Range: 6.0 MHz to 12 MHz for 2.5 V Input Frequency Range: 6.0 MHz to 13 MHz for 3.3 V - ăGenerates a 1X Low EMI Spread Spectrum clock of the Input Frequency - ăFrequency Deviation -1.25% (TYP) @ 10 MHz - ăAvailable in TSOP-6 Package (TSOT-23-6) - ăPb-Free Package is Available ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. ©Ă Semiconductor ponents Industries, LLC, 2006 December, 2006 - Rev. 3 Publication Order Number: NB2762A/D .. Modulation XIN/CLKIN XOUT Crystal Oscillator Frequency Divider Phase Detector Feedback Divider Loop Filter Output Divider Mod OUT Figure 1. Block Diagram Table 1. KEY SPECIFICATIONS Description Supply Voltages Frequency Range Cycle-to-Cycle Jitter Output Duty Cycle Modulation Rate Equation Frequency Deviation For 2.5 V Supply For 3.3 V Supply Specification VDD = 3.3 V / 2.5 V 6 MHz < CLKIN < 12 MHz 6 MHz < CLKIN < 13 MHz 200 ps (maximum) 45/55% (worst case) FIN/256 -1.25% (TYP) @ 10...