Datasheet4U Logo Datasheet4U.com

NB3H5150-01 - 2.5V / 3.3V Low Noise Multi-Rate Clock Generator

General Description

The NB3H5150 01 is a high performance Multi

generator which simultaneously synthesizes up to four different frequencies from a single PLL using a 25 MHz input reference.

Key Features

  • Flexible Input Reference.
  • 25 MHz Crystal, Oscillator,.
  • 1 ps maximum RMS Phase Jitter FRAC.
  • N (CLK4) Single.
  • Ended or Differential Clock 161.1328 MHz.
  • Four Independent User.
  • Programmable Clock.
  • I2C / SMBus Compatible Interface Frequencies from 25 MHz to 250 MHz.
  • Independently Configurable Outputs: Up to Eight LVCMOS Single Ended outputs or, Up to Four Differential LVPECL Outputs or any combination of LVCMOS and LVP.

📥 Download Datasheet

Datasheet Details

Part number NB3H5150-01
Manufacturer onsemi
File Size 187.83 KB
Description 2.5V / 3.3V Low Noise Multi-Rate Clock Generator
Datasheet download datasheet NB3H5150-01 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NB3002-VA10A High speed thermal printhead (300 dots / inch) Rohm
NB311 1.5Amp Complementary Power Drivers National Semiconductor
NB312 1.5Amp Complementary Power Drivers National Semiconductor
NB313 1.5Amp Complementary Power Drivers National Semiconductor
NB321 1.5Amp Complementary Power Drivers National Semiconductor

Other Datasheets by onsemi

Part Number Description
NB3H5150 2.5V / 3.3V Low Noise Multi-Rate Clock Generator
NB3H60113G 3.3V / 2.5V Programmable OmniClock Generator
NB3H60113GH3 2.5V Programmable OmniClock Generator
NB3H63143G Programmable Clock Generator
NB3H83905C 1.8V/2.5V/3.3V Crystal Input to 1:6 LVTTL/LVCMOS Clock Fanout Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NB3H5150-01 2.5V / 3.3V Low Noise Multi-Rate Clock Generator Description The NB3H5150−01 is a high performance Multi−Rate Clock generator which simultaneously synthesizes up to four different frequencies from a single PLL using a 25 MHz input reference. The www.onsemi.com reference frequency can be provided by a crystal, LVCMOS/LVTTL, LVPECL, HCSL or LVDS differential signals. The REFMODE pin will select the reference source. MARKING DIAGRAM* Three output banks (CLK1A/CLK1B to CLK3A/CLK3B) produce user selectable frequencies of: 33.33 MHz, 50 MHz, 100 MHz, 125 MHz, or 156.25 MHz and have ultra−low noise/jitter performance of less than 0.3 ps.