NCP398 - USB Type-C VCONN Overvoltage Protection IC

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCP398
Manufacturer	ON Semiconductor
File Size	680.71 KB
Description	USB Type-C VCONN Overvoltage Protection IC
Datasheet	NCP398 Datasheet
Additional preview pages of the NCP398 datasheet.

Product details

Description

Pin Pin Name Type Description A1 OUT OUTPUT Output voltage pin.The OUT pin must be connected to the circuitry that is to be protected (VCONN rail).B1 EN I/O Enable pin bar.The device enters in shutdown mode when this pin is tied high in which case the output is disconnected from the input.A2 IN POWER Input voltage pin.The IN pin must be connected to the input power supply (VBUS).B2 GND POWER Ground.Must be connected to the system GND plane.Table 2. DFN PINOUT DESCRIP

Features

Over.
voltage Protection up to + 28 V.
On.
chip Low Rdson NMOS Transistors: Typical 200 mW.
Over.
voltage Lockout (OVLO).
Shutdown EN Input.
Output Discharge Path.
WLCSP4 Package 0.84 x 0.84 mm, 0.4p.
UDFN6 Package 2 x 2 mm, 0.65p.
These Parts are ROHS Devices Typical.

📁 Similar Datasheet

NCP304 - Voltage Detector (ON)
NCP305 - Voltage Detector (ON)
NCP3163 - Switching Regulator (On Semiconductor)
NCP3296 - 40A Stackable Synchronous Buck Regulator (onsemi)
NCP345 - Overvoltage Protection (ON)
NCP346 - Overvoltage Protection (onsemi)
NCP-NFJ - C15 Type Accessories (Hirose Electric)
NCP-NFP - C15 Type Accessories (Hirose Electric)

Other Datasheets by ON Semiconductor

NCP3985 - Ultra-Low Dropout BiCMOS Voltage Regulator
NCP391 - Positive Overvoltage Protection Controller
NCP392A - Adjustable Front End Overvoltage Protection Controller
NCP392B - Adjustable Front End Overvoltage Protection Controller
NCP392D - Adjustable Front End Overvoltage Protection Controller
NCP300 - Voltage Detector

Published: Jun 29, 2018 |