NCP5214 Datasheet | onsemi

2- in- 1 Notebook DDR Power Controller The NCP5214 2- in- 1 Notebook DDR Power Controller is specifically designed as a total power solution for notebook DDR memory system. This IC bines the efficiency of a PWM controller for the VDDQ supply with the simplicity of linear regulators for the VTT termination voltage and the buffered low noise reference. This IC contains a synchronous PWM buck controller for driving two external NFETs to form the DDR memory supply voltage (VDDQ). The DDR memory termination regulator output voltage (VTT) and the buffered VREF are internally set to track at the half of VDDQ. An internal power good voltage monitor tracks VDDQ output and notifies the user whether the VDDQ output is within target range. Protective Features include soft- start circuitries, undervoltage monitoring of supply voltage, VDDQ overcurrent protection, VDDQ overvoltage and undervoltage protections, and thermal shutdown. The IC is packaged in DFN- 22. Features - Incorporates VDDQ, VTT Regulator, Buffered VREF - Adjustable VDDQ Output - VTT and VREF Track VDDQ/2 - Operates from Single 5.0 V Supply - Supports VDDQ Conversion Rails from 4.5 V to 24 V - Power- saving Mode for High Efficiency at Light Load - Integrated Power FETs with VTT Regulator Sourcing/Sinking 1.5 A DC and 2.4 A Peak Current - Requires Only 20 m F Ceramic Output Capacitor for VTT - Buffered Low Noise 15 m A VREF Output - All External Power MOSFETs are N- channel - <5.0 m A Current Consumption During Shutdown - Fixed Switching Frequency of 400 k Hz - Soft- start Protection for VDDQ and VTT - Undervoltage Monitor of Supply Voltage - Overvoltage Protection and Undervoltage Protection for VDDQ - Short- circuit Protection for VDDQ and VTT - Thermal Shutdown - Housed in DFN- 22 - This is a Pb- Free Device Typical Applications - Notebook DDR/DDR2 Memory Supply and Termination Voltage - Active Termination Busses (SSTL- 18, SSTL- 2, SSTL- 3) http://onsemi. MARKING DIAGRAM 22 DFN- 22 MN SUFFIX CASE...