NLAS4052 Datasheet | onsemi

NLAS4052 Analog Multiplexer/ Demultiplexer Double- Pole, 4- Position Plus mon Off The NLAS4052 is an improved version of the MC14052 and MC74HC4052 fabricated in sub- micron Silicon Gate CMOS technology for lower RDS(on) resistance and improved linearity with low current. This device may be operated either with a single supply or dual supply up to ±3 V to pass a 6 VPP signal without coupling capacitors. When operating in single supply mode, it is only necessary to tie VEE, pin 7 to ground. For dual supply operation, VEE is tied to a negative voltage, not to exceed maximum ratings. http://onsemi. MARKING DIAGRAMS 16 9 SO- 16 D SUFFIX CASE 751B NLAS4052 AWLYWW 1 8 - Improved RDS(on) Specifications - Pin for Pin Replacement for MAX4052 and MAX4052A - - One Half the Resistance Operating at 5.0 Volts Single or Dual Supply Operation - Single 2.5- 5 Volt Operation, or Dual ±3 Volt Operation - With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic, - No Translators Needed - Address and Inhibit pins are Logic is Over- Voltage Tolerant and - .. - May Be Driven Up +6 V Regardless of VCC Address and Inhibit pins are Standard TTL patible - Greatly Improved Noise Margin Over MAX4052 and MAX4052A Improved Linearity Over Standard HC4052 Devices Packages TSSOP- 16 DT SUFFIX CASE 948F NLAS 4052 ALYW 1 8 - - - Popular SOIC, and Space Saving TSSOP, and QSOP 16 Pin QSOP- 16 QS SUFFIX CASE 492 A WL, L Y WW, W NLAS 4052 ALYW 1 8 = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device NLAS4052DR2 NLAS4052DTR2 NLAS4052QSR Package...