NLAS4053 - Analog Multiplexer/Demultiplexer

Key Features

Improved RDS(on) Specifications.
Pin for Pin Replacement for MAX4053 and MAX4053A.
One Half the Resistance Operating at 5.0 Volts.
Single or Dual Supply Operation.
Single 3.
5 Volt Operation, or Dual ±3.0 Volt Operation.
With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic,.
No Translators Needed.
Address and Inhibit Pins are Over.
Voltage Tolerant and May Be.
Driven Up +6.0 V Regardless of.

NLAS4053 analog multiplexer/demultiplexer by ON - Datasheet Preview

Datasheet Details

Part number	NLAS4053
Manufacturer	ON
File Size	154.72 KB
Description	Analog Multiplexer/Demultiplexer
Datasheet	NLAS4053 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NLAS4051	Analog Multiplexer/Demultiplexer	ON Semiconductor
NLAS4051S	Analog Multiplexer/Demultiplexer	ON Semiconductor
NLAS4052	Analog Multiplexer/Demultiplexer	ON Semiconductor
NLAS4157	SPDT / 1 ohm RON Switch	ON Semiconductor
NLAS44599	Low Voltage Single Supply Dual DPDT Analog Switch	ON Semiconductor

Other Datasheets by ON

Part Number	Description
NLAS4599	Low Voltage Single Supply SPDT Analog Switch
NLAS4684	Ultra-Low Resistance Dual SPDT Analog Switch
NLAS323	Dual SPST Analog Switch
NLAS324	Dual SPST Analog Switch
NLAS3699	Dual DPDT Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

NLAS4053 Analog Multiplexer/ Demultiplexer Triple 2:1 Analog Switch−Multiplexer Improved Process, Sub−Micron Silicon Gate CMOS The NLAS4053 is an improved version of the MC14053 and MC74HC4053 fabricated in sub−micron Silicon Gate CMOS technology for lower RDS(on) resistance and improved linearity with low current. This device may be operated either with a single supply or dual supply up to ±3.0 V to pass a 6 VPP signal without coupling capacitors. When operating in single supply mode, it is only necessary to tie VEE, pin 7 to ground. For dual supply operation, VEE is tied to a negative voltage, not to exceed maximum ratings. Pin for pin compatible with all industry standard versions of ‘4053.