Datasheet4U Logo Datasheet4U.com

PE42671 - SP7T UltraCMOS

Description

The PE42671 is a HaRP™-enhanced SP7T RF Switch developed on the UltraCMOS™ process technology.

It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/PCS/ EDGE/WCDMA handsets.

Features

  • 2 TX, 2 TRX, 3 RX ports.
  • Three pin CMOS logic control with integral decoder/driver.
  • Exceptional harmonic performance: 2fo = -83 dBc and 3fo = -77.5 dBc.
  • Low TX insertion loss: 0.65 dB at 900 MHz, 0.75 dB at 1900 MHz.
  • TX.
  • RX Isolation of 46 dB at 900 MHz, 38 dB at 1900 MHz.
  • 1000 V HBM ESD tolerance all ports.
  • +68 dBm IIP3 @ 50 Ω.
  • -111 dBm IMD3.
  • No blocking capacitors required Figure 1. Functional Diagram.

📥 Download Datasheet

Datasheet preview – PE42671

Datasheet Details

Part number PE42671
Manufacturer Peregrine Semiconductor
File Size 745.37 KB
Description SP7T UltraCMOS
Datasheet download datasheet PE42671 Datasheet
Additional preview pages of the PE42671 datasheet.

📁 Similar Datasheet

  • PE42445 - High Isolation UltraCMOS SP4T RF Switch (pSemi)
  • PE42482 - SP8T RF Switch (pSemi)
  • PE42512 - RF Switch (pSemi)
  • PE42726 - SPDT RF Switch (pSemi)
  • PE4290X - (PE-xxxxX) General Purpose Transformers (Pulse)
  • PE4005 - RF CONNECTOR (Pasternack Enterprises)
  • PE4013S - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4013SA - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4025KC - N and P Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE40F - THYRISTOR MODULE (SanRex Corporation)
Other Datasheets by Peregrine Semiconductor

Full PDF Text Transcription

Click to expand full text
OBSOLETE Product Description The PE42671 is a HaRP™-enhanced SP7T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/PCS/ EDGE/WCDMA handsets. The switch is comprised of two transmit ports that can be used for GSM/PCS/EDGE, two transmit/receive ports (TRX1 and TRX2) that can be used for either WCDMA or as receive ports, and three symmetric receive ports. On-chip CMOS decode logic facilitates three-pin low voltage CMOS control, while high ESD tolerance of 1000 V at all ports, no blocking capacitor requirements, and on-chip SAW filter over-voltage protection devices make this the ultimate in integration and ruggedness.
Published: |