Datasheet4U Logo Datasheet4U.com

PI6C3503 - Low Power Spread Spectrum Frequency Multiplier

General Description

The PI6C3503 is a Low Power Frequency Multiplier with Spread Spectrum function to reduce EMI interference.

The PI6C3503 provides a 1 time Spread Spectrum modulated output from a single clock source or a crystal.

Key Features

  • Produces a 1 time spread spectrum clock signal from the input frequency.
  • 2.5 V or 3.3V power supply operation.
  • Input frequency range from 13MHz to 30MHz. www. DataSheet4U. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PI6C3991 Low-Voltage Programmable Skew Clock Buffer Pericom Semiconductor
PI6C39X0202 Low Skew 1 to 2 Clock Buffer DIODES
PI6C105 Precision Clock Synthesizer Pericom Semiconductor
PI6C10804 1:4 Networking Clock Buffer Pericom Semiconductor
PI6C10806 Low Skew 1:6 Crystal to LVCMOS Clock Buffer Pericom Semiconductor

Other Datasheets by Pericom Semiconductor (now Diodes Incorporated)

Part Number Description
PI6C3420A Spread Spectrum Clock Synthesizer
PI6C3421A Spread Spectrum Clock Synthesizer
PI6C39911 3.3V High Speed LVTTL or Balanced Output Programmable Skew Clock Buffer
PI6C3Q991 (PI6C3Q991 / PI6C3Q993) 3.3V Programmable Skew PLL Clock Driver
PI6C3Q993 (PI6C3Q991 / PI6C3Q993) 3.3V Programmable Skew PLL Clock Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PI6C3503 Low Power Spread Spectrum Frequency Multiplier Features • Produces a 1 time spread spectrum clock signal from the input frequency. • 2.5 V or 3.3V power supply operation. • Input frequency range from 13MHz to 30MHz. www.DataSheet4U.com Description The PI6C3503 is a Low Power Frequency Multiplier with Spread Spectrum function to reduce EMI interference. The PI6C3503 provides a 1 time Spread Spectrum modulated output from a single clock source or a crystal. The PI6C3503 can reduce EMI at the clock output and it allows significant system cost savings by reducing the number of circuit board layers ferrite beads and shielding that are traditionally required to pass EMI regulations. Power down control is selectable through external logic state setting.