PHY6202
PHY6202 is Bluetooth Low Energy SOC manufactured by Phyplus.
Features
- ARM® Cortex™-M0 32-bit processor
- Memory
- 512/256KB in-system flash memory
- 128KB ROM
- 138KB SRAM, all programmable retention in sleep mode
- 8-channel DMA
- 33/19 general purpose I/O pins
- All pins can be configured as serial interface and programmable IO MUX function mapping
- All pins can be configured for wakeup
- 18 pins for triggering interrupt
- 3 quadrature decoder(QDEC)
- 6-channel PWM
- 4-channel I2S
- 2-channel PDM
- 2-channel I2C
- 2-channel SPI
- 2-channel UART
- JTAG
- 8-channel 12bit ADC with analog PGA
- 4-channel 32bit timer, one watchdog timer
- Real timer counter (RTC)
- Power, clock, reset controller
- Flexible power management
- Supply voltage range 1.8V to 3.6V
- Embedded buck DC-DC
- Embedded LDOs
- Battery monitor: Supports low battery detection
- 2μA @ Sleep Mode with 32KHz RTC
- 0.7μA @ OFF Mode(IO wake up only)
- 2.4 GHz transceiver
- pliant to Bluetooth 5.0, ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)
- Sensitivity: -97d Bm@BLE 1Mbps data rate -103d Bm@BLE 125Kbps data rate
- TX Power -20 to +10d Bm in 3d B steps
- Receiver: 8m A @sensitivity level
- Transmitter: 8m A @0d Bm TX power
- Single-pin antenna: no RF matching or RX/TX switching required
- RSSI (1d B resolution)
- RC oscillator hardware...
