PAS5101PE Datasheet | Pixart Imaging

Description The PAS5101PE is a highly integrated CMOS active-pixel image sensor that has resolution of 1280( H ) x 1024 ( V ). To have an excellent image quality, the PAS5101PE output 10-bits RGB raw data though a parallel data bus. It is available in 48-pin LCC. The PAS5101PE can be programmed to set the exposure time for different luminance condition via I2CTM serial control bus. By programming the internal register sets, it performs on-chip frame rate adjustment, offset correction DAC, programmable gain control, 10-bits ADC, 10-bits output panding, interpolated subsampling and defect pensation. w w w Features z z z z z . D a t a S h e e t . c o m Key Specification Supply Voltage Resolution Array Diagonal Pixel Size Max. Frame Rate Max. System Clock Max. Pixel Clock Color Filter Exposure Time Scan Mode Sensitivity S/N Ratio Chief Ray Angle Package Type 2.5v ~ 3.3v 1280 ( H ) x 1024 ( V ) 5.9mm ( ~1/3” Optic ) 3.6μm x 3.6μm ~15 fps @ 1.3Mega Up to 48MHz Up to 24MHz RGB Bayer Pattern ~ Frame time to Line time Progressive TBD TBD 20° ~ 24° 48-pin LCC 1.3Mega resolution, ~1/3” Lens. Bayer RGB color filter array. 10-bits parallel RGB raw data output. On-Chip 10-bits pipeline A/D converter. On-Chip programmable gain amplifier - - 4-bits color gain amplifier. 4-bits global gain amplifier. z z z z z z z z z z Digital gain stage. Continuous variable frame time. Continuous variable exposure time. I2CTM interface. 20m A power dissipation ( 15fps / 2.5v ). < 10u A low power-down dissipation. Window-of-Interest (WOI). Sub-sampling. Defect pensation. Lens shading pensation. All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission. Pix Art Imaging Inc. E-mail: fae_service@pixart..tw v1.0 2005/4/27 PAS5101PE Specification 1. Pin Assignment SYSCLK VDDMD PXCLK RESET VSSD PX7 NC NC VSYNC PX9 NC NC NC NC PX8 VDDD 19 20 21 22...