PE12016G Datasheet | Productivity Engineering

..net PE12016G / PE12024G Incremental Encoder December 15, 2005 Version 1.7 Features : - Functional and pinpatible with obsolete TI CF32007NW/NT / THCT12016 / THCT 12024 / LS2000 5 V and 3.3 V Operation 0.6u CMOS Process Direction discriminator Pulse width measurement Frequency measurement Cascadable (PE12016G only) - - - - - - - TTL patible 8 Bit parallel tristateable Bus Simple read & write procedure High speed 20 MHz clock operation PE12016G ONLY: 1:1 Replacement for LS2000AN PE12024G ONLY: 24-Bit resolution, separate UA0 counter reset WEEE & Ro HS pliant according DIRECTIVE 2002/95/EC (Green Package Material) - - - - - - PE12016G PDIP28-600 Mil 1 28 1 PE12024G PDIP24-300 Mil 24 CS RD D0 D1 D2 D3 GND D4 D5 D6 D7 BORROW CARRY GND VCC UP DOWN WE RESET A0 CLK UA2 UA1 M0 M1 M2 READY KLI-KLO CS RD D0 D1 D2 D3 GND D4 D5 D6 D7 VCC UA0 A1 WE RESET A0 CLK UA2 UA1 M0 M1 M2 12 15 Description: The PE12016G/12024G INCREMENTAL ENCODER INTERFACE can independently determine the direction or displacement of a mechanical device or axis based on two input signals from transducers in quadrature. Alternatively, it can measure a pulse width using a known clock rate, or a frequency, by counting input pulses over a known time interval. It includes one 16-bit or 24bit counter which may also be used separately (PE12016G only). The PE12016G may be cascaded to provide accuracy greater than 16bits. Both devices are designed for use in many microprocessor-based systems. December 15, 2005 (Version 1.7) Seite 1 / 25 PE12016G/24G ..net PE12016G / PE12024G Incremental Encoder December 15, 2005 Version 1.7 Availability: The PE12016G/24G is available as replacement IC or Netlist IP Core, fully patible with the obsolete TI CF32007NW/NT functionality. The replacement IC is packaged within the popular PDIP28-600 Mil (PE12016G) and the PDIP24300 Mil package (PE12024G). The IP Core can be targeted to any desired FPGA/CPLD or ASIC...