SIW3000 Datasheet | RF Micro Devices

Features - Single-chip IC with 2.4 GHz transceiver, baseband processor, and on-chip protocol stack for Bluetooth® wireless technology - pliant with Bluetooth specification 1.2 features . - Low cost 0.18 µm CMOS process technology. - 1.8 V analog and digital core voltages; 1.62 V to 3.63 V external I/O interface voltage. - Typical -85 d Bm receiver sensitivity, +2 d Bm transmitter power for up to 100 meters nominal range. - On-chip VCO and PLL support multiple GSM/GPRS and CDMA cellular reference clock frequencies. - Hardware AGC dynamically adjusts receiver performance in changing environments. - Integrated 32-bit ARMTDMI® processor for extended features . - Full piconet connectivity with support for up to 7 active and 8 parked slaves. - Scatternet patible with Microsoft® HID devices. - Supports three SCO voice channels. - Channel Quality Driven Data Rate (CQDDR) controls multi-slot packets to minimize packet overhead and maximize data throughput. - Option for Bluetooth + Wi-Fi coexistence. ULTIMATEBLUE™ RADIO PROCESSOR Sleep Control 2.4 GHz Direct Conversion Transceiver Power Management ARM7TDMI® Processor SRAM Data ROM HCI Firmware Up to 2 Mbs USB Full Speed MODEM Internal 32 k Hz Clock UART USB GPIO Audio CODEC Interface To Antenna Bluetooth Baseband with CVSD System I/O CODEC Master or Slave Product Description The Si W3000 Ultimate Blue™ Radio Processor is a recent innovation for Bluetooth® wireless technology. It bines the industry's best performing and most highly integrated radio design with an ARMTDMI® processor using CMOS technology. The Si W3000 uses direct conversion (zero-IF) architecture. This allows digital filtering for excellent interference rejection as pared to low IF solutions and also results in fewer spurious responses. The lower-layer protocol stack software is integrated into the on-chip ROM. Optional external Flash memory is also supported. The Si W3000 is pliant with Bluetooth specification 1.2 features . The device is available in multiple...