Datasheet4U Logo Datasheet4U.com

HIP4086A - 3-Phase MOSFET Driver

Download the HIP4086A datasheet PDF. This datasheet also covers the HIP4086 variant, as both devices belong to the same 3-phase mosfet driver family and are provided as variant models within a single manufacturer datasheet.

General Description

High-Side Bias Connections.

One external bootstrap diode and one capacitor are required for each.

Key Features

  • Independently drives 6 N-channel MOSFETs in 3-phase bridge configuration.
  • Bootstrap supply maximum voltage up to 95VDC with bias supply from 7V to 15V.
  • 1.25A peak turn-off current.
  • User programmable dead time (0.5µs to 4.5µs).
  • Bootstrap and optional charge pump maintain the high-side driver bias voltage.
  • Programmable bootstrap refresh time.
  • Drives 1000pF load with typical rise time of 20ns and fall time of 10ns.
  • Programmab.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HIP4086-Renesas.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number HIP4086A
Manufacturer Renesas
File Size 813.16 KB
Description 3-Phase MOSFET Driver
Datasheet download datasheet HIP4086A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP4081 80V/2.5A Peak/ High Frequency Full Bridge FET Driver Intersil Corporation
HIP4011 Three Phase Brushless DC Motor Controller Intersil Corporation
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control Intersil Corporation
HIP1030 1A High Side Driver with Overload Protection Intersil Corporation
HIP1031 Half Amp High Side Driver with Overload Protection Intersil Corporation

Other Datasheets by Renesas

Part Number Description
HIP4086 3-Phase MOSFET Driver
HIP4080 High FrequencyFull Bridge FET Driver
HIP4080A High Frequency Full Bridge FET Driver
HIP4081A High Frequency Full Bridge FET Driver
HIP4082 1.25A Peak Current H-Bridge FET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIP4086, HIP4086A 80V, 500mA, 3-Phase MOSFET Driver The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0.5µs to 4.5µs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor drives. The only difference between the HIP4086 and the HIP4086A is that the HIP4086A has the built-in charge pumps disabled. This is useful in applications that require very quiet EMI performance (the charge pumps operate at 10MHz).