Datasheet4U Logo Datasheet4U.com

X93254 - Dual Digitally Potentiometer

Description

TSSOP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VCC (SUPPLY VOLTAGE) UP/DOWN (U/D1) INCREMENT (INC1) DEVICE SELECT (CS1) UP/DOWN (U/D2) INCREMENT (INC2) DEVICE SELECT (CS2) 30k 30k CONTROL AND MEMORY CONTROL AND MEMORY VSS (Ground) SYMBOL DNC RL1 CS1 INC2 U/D2 RH2 VSS DNC RL2 CS2 VCC INC1 U/D1 RH1 Do N

Features

  • Dual solid-state potentiometers.
  • Independent Up/Down interfaces.
  • 32 wiper tap points per potentiometer - Wiper position stored in nonvolatile memory and recalled on power-up.
  • 31 resistive elements per potentiometer - Temperature compensated - Maximum resistance tolerance of ± 30% - Terminal voltage, 0 to VCC.
  • Low power CMOS - VCC = 3V ±10% - Active current, 250µA max - Standby current, 1µA max.
  • High reliability - Endurance 200,000 data chan.

📥 Download Datasheet

Datasheet preview – X93254

Datasheet Details

Part number X93254
Manufacturer Renesas
File Size 418.94 KB
Description Dual Digitally Potentiometer
Datasheet download datasheet X93254 Datasheet
Additional preview pages of the X93254 datasheet.

📁 Similar Datasheet

  • X930A - UNIVERSAL SERIAL BUS MICROCONTROLLER (Intel Corporation)
  • X9312 - Terminal Voltage 0V to 15V (Intersil Corporation)
Other Datasheets by Renesas
  • X93255 - Dual Digitally Potentiometer
  • X93256 - Dual Digitally Potentiometer
  • X9313 - Digitally Controlled Potentiometer
  • X9314 - Single Digitally Potentiometer
  • X9315 - Digitally Potentiometer
  • X93154 - Digitally Potentiometer
  • X93155 - Digitally Potentiometer
  • X93156 - Single Digitally Potentiometer

Full PDF Text Transcription

Click to expand full text
DATASHEET X93254 Dual Digitally Controlled Potentiometers (XDCPs™) FN8186 Rev 1.00 February 4, 2008 The Intersil X93254 is a dual digitally controlled potentiometer (XDCP). The device consists of two resistor arrays, wiper switches, a control section, and nonvolatile memory. The wiper positions are controlled by individual Up/Down interfaces. A potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. The position of each wiper element is controlled by a set of independent CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon during a subsequent power-up operation.
Published: |