Datasheet4U Logo Datasheet4U.com

X9314 - Single Digitally Potentiometer

Datasheet Summary

Description

VH/RH and VL/ RL The high (VH/RH) and low (VL/RL) terminals of the X9314 are equivalent to the fixed terminals of a mechanical potentiometer.

The minimum voltage is -5V and the maximum is +5V.

Features

  • Solid State Potentiometer.
  • 32 Taps.
  • 10kEnd to End Resistance.
  • Three-Wire Up/Down Serial Interface.
  • Wiper Resistance, 40Typical.
  • Nonvolatile Storage and Recall on Power-up of Wiper Position Standby Current < 500µA Max (Total Package).
  • VCC = 3V to 5.5V Operation.
  • 100 Year Data Retention.
  • Offered in 8 Ld MSOP and SOIC Packages.
  • Pb-Free Plus Anneal Available (RoHS Compliant) U/D INC CS VCC VSS 5-Bit UP/D.

📥 Download Datasheet

Datasheet preview – X9314

Datasheet Details

Part number X9314
Manufacturer Renesas
File Size 437.96 KB
Description Single Digitally Potentiometer
Datasheet download datasheet X9314 Datasheet
Additional preview pages of the X9314 datasheet.

📁 Similar Datasheet

  • X9312 - Terminal Voltage 0V to 15V (Intersil Corporation)
  • X930A - UNIVERSAL SERIAL BUS MICROCONTROLLER (Intel Corporation)
Other Datasheets by Renesas
  • X9313 - Digitally Controlled Potentiometer
  • X9315 - Digitally Potentiometer
  • X93154 - Digitally Potentiometer
  • X93155 - Digitally Potentiometer
  • X93156 - Single Digitally Potentiometer
  • X9317 - Digitally Controlled Potentiometer
  • X9318 - Digitally Potentiometer
  • X9319 - Digitally Potentiometer

Full PDF Text Transcription

Click to expand full text
DATASHEET X9314 Terminal Voltages ±5V, 32 Taps, Log Taper Single Digitally Controlled Potentiometer (XDCP™) FN8178 Rev 3.00 July 24, 2014 The Intersil X9314 is a solid state nonvolatile potentiometer and is ideal for digitally controlled resistance trimming. The X9314 is a resistor array composed of 31 resistive elements. Between each element and at either end are tap points accessible to the wiper element. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
Published: |