Datasheet4U Logo Datasheet4U.com

SGM42600 - Dual H-Bridge Motor Driver

General Description

The SGM42600 provides a dual bridge motor driver solution for battery-powered toys, printers and other low-voltage or battery-powered motion control applications.

The device has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads.

Key Features

  • Dual H-Bridge Current-Controlled Motor Driver Capable of Driving Two DC Motors or One Stepper Motor.
  • Low MOSFET On-Resistance: HS + LS 410mΩ.
  • Output Current 1.5A RMS, 2A Peak per H-Bridge (at VCC = 5V, +25℃).
  • 2.7V to 24V Wide Power Supply Voltage Range.
  • PWM Winding Current Regulation/Limiting.
  • Fault Indication Output.
  • Available in Green TSSOP-16 (Exposed Pad) and TQFN-4×4-16L Packages.

📥 Download Datasheet

Datasheet Details

Part number SGM42600
Manufacturer SG Micro
File Size 600.67 KB
Description Dual H-Bridge Motor Driver
Datasheet download datasheet SGM42600 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM4157 DPDT Analog Switch Shengbang Microelectronics
SGM44599 DPDT Analog Switch Shengbang Microelectronics
SGM44600 DPDT Analog Switch Shengbang Microelectronics
SGM44601 DPDT Analog Switch Shengbang Microelectronics
SGM44602 DPDT Analog Switch Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM42606 Single H-Bridge DC Motor Driver
SGM42609 Single H-Bridge Motor Driver
SGM42610 Stepper Motor Driver
SGM42611 Stepper Motor Driver
SGM42630 Stepper Motor Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM42600 Dual H-Bridge Motor Driver GENERAL DESCRIPTION The SGM42600 provides a dual bridge motor driver solution for battery-powered toys, printers and other low-voltage or battery-powered motion control applications. The device has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. With proper PCB design, each H-bridge of the SGM42600 is capable of driving up to 1.5A RMS (or DC) continuously, at +25℃ with a VCC supply of 5V. It can support peak currents of up to 2A per H-bridge.