Datasheet4U Logo Datasheet4U.com

SGM42609 - Single H-Bridge Motor Driver

General Description

The SGM42609 provides a single bridge motor driver solution for battery-powered toys, toothbrushes and other low-voltage or battery-powered motion control applications.

The device has one H-bridge driver, and can drive one DC brush motor, solenoid, or other inductive load.

Key Features

  • Single H-Bridge Motor Driver can Drive One DC Brush Motor.
  • Low MOSFET On-Resistance: HS + LS 480mΩ.
  • Output Current 1.5A RMS, 2A Peak Current (at VCC = 5V, +25℃).
  • 2.7V to 24V Wide Power Supply Voltage Range.
  • PWM Winding Current Regulation/Limiting.
  • Fault Indication Output.
  • Available in Green MSOP-10 and TDFN-3×3-10L Packages.

📥 Download Datasheet

Datasheet Details

Part number SGM42609
Manufacturer SG Micro
File Size 546.65 KB
Description Single H-Bridge Motor Driver
Datasheet download datasheet SGM42609 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM4157 DPDT Analog Switch Shengbang Microelectronics
SGM44599 DPDT Analog Switch Shengbang Microelectronics
SGM44600 DPDT Analog Switch Shengbang Microelectronics
SGM44601 DPDT Analog Switch Shengbang Microelectronics
SGM44602 DPDT Analog Switch Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM42600 Dual H-Bridge Motor Driver
SGM42606 Single H-Bridge DC Motor Driver
SGM42610 Stepper Motor Driver
SGM42611 Stepper Motor Driver
SGM42630 Stepper Motor Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM42609 Single H-Bridge Motor Driver GENERAL DESCRIPTION The SGM42609 provides a single bridge motor driver solution for battery-powered toys, toothbrushes and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver, and can drive one DC brush motor, solenoid, or other inductive load. The output driver block of H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. H-bridge includes circuitry to regulate or limit the winding current. With proper PCB design, H-bridge of the SGM42609 is capable of driving up to 1.5A RMS (or DC) continuously, at +25℃ with a VCC supply of 5V. It can support peak current of up to 2A. Current capability is reduced slightly at lower VCC voltage.