Datasheet4U Logo Datasheet4U.com

SGM42606 - Single H-Bridge DC Motor Driver

General Description

The SGM42606 is a motor driver device with one integrated H-bridge that can run a DC motor, a solenoid, one winding of a bipolar stepper motor, or other devices.

It can be used in a variety of applications such as consumer products, toys and other battery-powered motion-control applications.

Key Features

  • are provided in the device including over-current, short-circuit, over-voltage, under-voltage lockout and thermal shutdown. The SGM42606 is available in a Green TQFN-5.5×3.5-24L package.

📥 Download Datasheet

Datasheet Details

Part number SGM42606
Manufacturer SG Micro
File Size 677.86 KB
Description Single H-Bridge DC Motor Driver
Datasheet download datasheet SGM42606 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM4157 DPDT Analog Switch Shengbang Microelectronics
SGM44599 DPDT Analog Switch Shengbang Microelectronics
SGM44600 DPDT Analog Switch Shengbang Microelectronics
SGM44601 DPDT Analog Switch Shengbang Microelectronics
SGM44602 DPDT Analog Switch Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM42600 Dual H-Bridge Motor Driver
SGM42609 Single H-Bridge Motor Driver
SGM42610 Stepper Motor Driver
SGM42611 Stepper Motor Driver
SGM42630 Stepper Motor Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM42606 Low On-Resistance, Single H-Bridge DC Motor Driver GENERAL DESCRIPTION The SGM42606 is a motor driver device with one integrated H-bridge that can run a DC motor, a solenoid, one winding of a bipolar stepper motor, or other devices. It can be used in a variety of applications such as consumer products, toys and other battery-powered motion-control applications. This device integrates four N-MOSFETs, which can operate over a supply voltage range of 2V to 12V. With proper heatsinking, the SGM42606 can deliver up to 6A peak output current and 3A continuous output current. The required gate drive voltages are generated by an internal charge pump.