Datasheet4U Logo Datasheet4U.com

SGM7SZ245S - Octal Bus Transceiver

General Description

The SGM7SZ245S is an octal bus transceiver with 3-state outputs, which can accept supply voltage range from 1.8V to 5.5V.

The device is mainly used for asynchronous communication between data buses.

The control function can minimize external timing requirements to the greatest extent possible.

Key Features

  • Wide Supply Voltage Range:1.8V to 5.5V.
  • Input and Output Interface Capability to 5.5V System Environment.
  • +7.8mA/-7.8mA Output Current at VCC = 5.0V.
  • 3-State Outputs Drive Bus Lines Directly.
  • -40℃ to +125℃ Operating Temperature Range.
  • Available in Green TSSOP-20, TQFN-3×3-20L and TQFN-5.5×3.5-24L Packages LOGIC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM706 Microprocessor Supervisory Shengbang Microelectronics
SGM708 Microprocessor Supervisory Shengbang Microelectronics
SGM721 Rail-to-Rail I/O CMOS Operational Amplifiers Shengbang Microelectronics
SGM722 Rail-to-Rail I/O CMOS Operational Amplifiers Shengbang Microelectronics
SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch SG Micro Limited

Other Datasheets by SG Micro

Part Number Description
SGM7SZ244 Octal Buffers/Line Drivers
SGM7SZ244S Octal Buffer/Line Driver
SGM7SZ00 Small Logic Two-Input NAND Gate
SGM7SZ04 Small Logic Inverter
SGM7SZ08 Small Logic Two-Input AND Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM7SZ245S Octal Bus Transceiver with 3-State Outputs GENERAL DESCRIPTION The SGM7SZ245S is an octal bus transceiver with 3-state outputs, which can accept supply voltage range from 1.8V to 5.5V. The device is mainly used for asynchronous communication between data buses. The control function can minimize external timing requirements to the greatest extent possible. The An and Bn are 8-bit data input-output ports. DIR is the direction control input and O����E� is the output enable input. When DIR is set high, it allows transmission from An to Bn. When DIR is set low, it allows transmission from Bn to An. O����E� can be used to make the outputs disabled so that the buses are effectively isolated. The SGM7SZ245S is available in Green TSSOP-20, TQFN-3×3-20L and TQFN-5.5×3.5-24L packages.