SIT1462Q
SIT1462Q is CAN FD signal improvement transceiver manufactured by SIT.
芯力特
CAN FD signal improvement transceiver with Standby mode
Features
- ISO 11898-2:2024, SAE J2284-1~ SAE J2284-5 and SAE J1939-14 pliant;
- Implements CAN Signal Improvement Capability as defined in Ci A 601-4:2019;
- Thermally protected;
- ±40V BUS protection;
- Driver (TXD) dominant time-out function;
- Low power Standby mode with remote and local wake-up capability;
- SIT1462Q/3 I/O pins supports 1.8V, 3.3V and 5V MCU;
- Undervoltage protection on pins VCC and VIO;
- High-speed CAN, support 5Mbps CAN with Flexible Data-Rate and 8Mbps CAN with Flexible Data-
Rate in point-to point networks;
- High Electro Magnetic Immunity;
- Unpowered state disengages from the bus;
- Available in SOP8 and DFN3- 3-8 packages.
DESCRIPTION
SIT1462Q is an interface chip applied between the CAN protocol controller and the physical two-wire CAN bus. It Features a much tighter bit timing symmetry performance to enable CAN FD munication up to 8Mbit/s, and has the capability of differential signal transmission between bus and CAN protocol controller.
Parameter
Symbol
Min
Max
Unit
VCC supply voltage
VIO supply voltage
CANH, CANL input / output voltage
Vcan
-40
+40
Bus differential...
