Datasheet4U Logo Datasheet4U.com

M29W002BB Datasheet 2 Mbit 256kb X8 / Boot Block Low Voltage Single Supply Flash Memory

Manufacturer: STMicroelectronics

Overview: M29W002BT M29W002BB 2 Mbit (256Kb x8, Boot Block) Low Voltage Single Supply Flash Memory PRELIMINARY DATA s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 55ns PROGRAMMING TIME – 10µs by Byte typical 7 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 4 Main Blocks s s s s PROGRAM/ERASE CONTROLLER – Embedded Byte Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP40 (N) 10 x 20mm s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1. Logic Diagram s TEMPORARY BLOCK UNPROTECTION MODE UNLOCK BYPASS PROGRAM MAND – Faster Production/Batch Programming LOW POWER CONSUMPTION – Standby and Automatic Standby A0-A17 W E G RP M29W002BT M29W002BB RB 18 VCC s s 8 DQ0-DQ7 s 100,000 PROGRAM/ERASE CYCLES per BLOCK 20 YEARS DATA RETENTION – Defectivity below 1 ppm/year ELECTRONIC SIGNATURE – Manufacturer Code: 20h – Top Device Code M29W002BT: 40h – Bottom Device Code M29W002BB: C2h s s VSS AI02955 March 2000 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/20 M29W002BT, M29W002BB Figure 2. TSOP Connections Table 1.

General Description

The M29W002B is a 2 Mbit (256Kb x8) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single low voltage (2.7 to 3.6V) supply.

On power-up the memory defaults to its Read mode where it can be

Key Features

  • e timing requirements. Output Disable. The Data Inputs/Outputs are in the high impedance state when Output Enable.

M29W002BB Distributor