Datasheet4U Logo Datasheet4U.com

M29W160BB - 16 Mbit 2Mb x8 or 1Mb x16 / Boot Block Low Voltage Single Supply Flash Memory

General Description

The M29W160B is a 16 Mbit (2Mb x8 or 1Mb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single low voltage (2.7 to 3.6V) supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • TE is High and references to the Address Inputs to include this pin when BYTE is Low except when stated explicitly otherwise. Chip Enable (E). The Ch.

📥 Download Datasheet

Datasheet Details

Part number M29W160BB
Manufacturer STMicroelectronics
File Size 170.65 KB
Description 16 Mbit 2Mb x8 or 1Mb x16 / Boot Block Low Voltage Single Supply Flash Memory
Datasheet download datasheet M29W160BB Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29W160BT M29W160BB 16 Mbit (2Mb x8 or 1Mb x16, Boot Block) Low Voltage Single Supply Flash Memory PRELIMINARY DATA s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 70ns PROGRAMMING TIME – 10µs per Byte/Word typical 35 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 32 Main Blocks TSOP48 (N) 12 x 20mm 1 44 s s s SO44 (M) s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin LFBGA48 (ZA) 8 x 6 solder balls FBGA s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.