STMicroelectronics L6362
The L6362 is a monolithic dual push pull Transceiver fully compliant to PHY2 (3 wires) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. fault condition stored in the status register) the communication between the system microcontroller and L6362 is based on a high speed 2 wires interface.| Part No. | L6362 |
|---|---|
| Datasheet | L6362 Download |
| Manufacturer |  STMicroelectronics |
| Description | Fully integrated device transceiver IC |
| Buy | Stock & Price |
FEATURES
●●
●
●
● Supply voltage from 8 V to 32.5 V 2 programmable output stages: high-side, lowside or push-pull (< 4 Ω @125 °C) Up to 230 kHz communication speed 2 industrial digital inputs, type 1 compliant and programmable filter Short-circuit and overcurrent outputs protection through current limitation and programmable cut-off current Overvoltage protection (>36 V) 3.3 V/5 V selectable 50 mA linear regulator (with maximum power dissipation = 200 mW) On chip high efficiency adjustable 50 mA synchronous step-down switching regulator Control, configuration and diagnostic registers Diagnostic dual LED sequence generator and driver Internal clock generator with programmable frequency divider 5 V and 3.3 V compatible I/Os Integrated active reverse polarity protection with 200 mV @ 200 mA drop Integrated, IEC61000-4-5 surge protection, with source impedance 500 Ω Overtemperature protection ESD protection Conform to IEC 61000-4-4 Miniaturized: QFN 3.5 x 5 x 1 26 lead package QFN 26L Des...
