STMicroelectronics L6364
The L6364 is a dual channel transceiver for industrial sensor applications. It has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signaling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface.| Part No. | L6364 |
|---|---|
| Datasheet | L6364 Download |
| Manufacturer |  STMicroelectronics |
| Description | Dual-channel transceiver |
| Buy | Stock & Price |
FEATURES
● Supply voltage from 5 V to 35 V● 2.5 V to 5 V compatible I/Os
● 3.3 V and 5 V, 50 mA linear regulators
● 50 mA DC-DC regulator with configurable frequency (0.5 MHz to 2 MHz) & voltage (5 V to 10.5 V)
● Low dissipative (5 Ω) CQ and DIO output stages configurable in high side, low side, push/pull
● Configurable reporting threshold (0.11 A to 0.25 A) of current limitation for CQ and DIO lines
● Configurable reporting threshold (0.22 A to 0.5 A) of current limitation for CQ//DIO line (Join Mode)
● Fully protected: – Embedded reverse polarisation diode (DOUT pin) – Full zero current reverse polarity between VPLUS, CQ, DIO and PGND pins – Configurable (up to 216°C) thermal shutdown threshold – 7-bit, calibrated, temperature measurement – Configurable (6.0 V to 15 V) VPLUS undervoltage detection – CQ and DIO short-circuit current limit and reporting
● -40 to +150°C operating temperature
● Suitable to drive L, C and R loads
● Quartz-free IO-Link clock extraction and timing generati...
