Datasheet4U Logo Datasheet4U.com

L6360 - IO-Link communication master transceiver

Datasheet Summary

Description

The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes.

Features

  • Supply voltage from 18 V to 32.5 V.
  • Programmable output stages: high-side, low-side or push-pull (< 2 Ω).
  • Up to 500 mA L+ protected high-side driver.
  • COM1, COM2 and COM3 mode supported.
  • Additional IEC61131-2 type 1 input.
  • Short-circuit and overcurrent output protection through current limitation and programmable cut-off current.
  • 3.3 V / 5 V, 50 mA linear regulator.
  • 5 mA IO-Link digital input.
  • Fast mode I2C for IC c.

📥 Download Datasheet

Datasheet preview – L6360

Datasheet Details

Part number L6360
Manufacturer STMicroelectronics
File Size 1.19 MB
Description IO-Link communication master transceiver
Datasheet download datasheet L6360 Datasheet
Additional preview pages of the L6360 datasheet.

📁 Similar Datasheet

  • L634 - THREE PHASE MOTOR DRIVER (ST Microelectronics)
  • L6372 - Dual N-Channel MOSFET (VBsemi)
  • L6375S - 0.5A High Side Driver Industrial Intelligent Power Switch (ST Microelectronics)
  • L6382D - Power management unit (ST Microelectronics)
  • L6388 - HIGH-VOLTAGE HIGH AND LOW SIDE DRIVER (ST Microelectronics)
Other Datasheets by STMicroelectronics
  • L6362 - Fully integrated device transceiver IC
  • L6362A - IO-Link communication transceiver
  • L6364 - Dual-channel transceiver
  • L6316 - 4-CHANNEL LOW POWER PREAMPLIFIER
  • L6370Q - 2.5 A single high-side smart power switch
  • L6382D5 - Power management unit
  • L6384 - HIGH-VOLTAGE HALF BRIDGE DRIVER
  • L6384E - High voltage half-bridge driver

Full PDF Text Transcription

Click to expand full text
L6360 Datasheet IO-Link communication master transceiver IC Product status link L6360 Product summary Order code L6360TR Package VFQFPN 26L (3.5x5x1 mm) Packing Tape and reel Product label Features • Supply voltage from 18 V to 32.5 V • Programmable output stages: high-side, low-side or push-pull (< 2 Ω) • Up to 500 mA L+ protected high-side driver • COM1, COM2 and COM3 mode supported • Additional IEC61131-2 type 1 input • Short-circuit and overcurrent output protection through current limitation and programmable cut-off current • 3.3 V / 5 V, 50 mA linear regulator • 5 mA IO-Link digital input • Fast mode I2C for IC control, configuration and diagnostic • Diagnostic dual LED sequence generator and driver • 5 V and 3.
Published: |