STMicroelectronics VN330SP-E
The VN330SP-E is a monolithic device developed using VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. The open drain diagnostic output indicates overtemperature conditions.| Part No. | VN330SP-E |
|---|---|
| Datasheet | VN330SP-E Download |
| Manufacturer |  STMicroelectronics |
| Description | Quad high-side smart power solid-state relay |
| Buy | Stock & Price |
FEATURES
● Output current: 0.7 A per channel● Digital input clamped at 32 V minimum voltage
● Shorted load and overtemperature protections
● Built-in current limiter
● Undervoltage shutdown
● Open drain diagnostic output
● Fast demagnetization of inductive loads
● Conforms to IEC 61131-2
APPLICATIONS
● Programmable logic control● Industrial PC peripheral input/output
● Numerical control machines
DESCRIPTION
Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. DS4361 - Rev 5 - May 2022 For further information contact your local STMicroelectronics sales office. 1 Block diagram Figure 1. Block diagram VN330SP-E Block diagram DS4361 - Rev 5 page 2/21 2 Pin connection Figure 2. Connection diagram (top view) VN330SP-E Pin connection DS4361 - Rev 5 page 3/21 Figure 3. Current and voltage conventions VN330SP-E Pin connection DS4361 - Rev 5 page 4/21 VN330SP-E Maximum ratings 3 Maximum ratings Symbol VCC -VCC IOUT IR IIN IDIAG VESD EAS PTOT TJ TSTG Table 1.
