Download W20NB50 Datasheet PDF
STMicroelectronics
W20NB50
W20NB50 is STW20NB50 manufactured by STMicroelectronics.
features due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built- in channels to reduce the characteristic difference between L and R channels. It also contains various kind of protection. TA8221AHQ TA8221ALQ Features - - Low thermal resistance : θj- T = 1.5°C / W (infinite heat sink) High power : POUT (1) = 30W (typ.) / channel (VCC = 14.4V, f = 1k Hz, THD = 10%, RL =2Ω) POUT (2) = 26W (typ.) / channel (VCC = 13.2V, f = 1k Hz, THD = 10%, RL = 2Ω) POUT (3) = 19W (typ.) / channel (VCC = 13.2V, f = 1k Hz, THD = 10%, RL = 4Ω) - - - - - - Low distortion ratio: THD = 0.04% (typ.) (VCC = 13.2V, f = 1k Hz, POUT = 1W, RL = 4Ω, GV = 50d B) Low noise: VNO = 0.30m Vrms (typ.) (VCC = 13.2V, RL = 4Ω, GV 50d B, Rg = 0Ω, BW = 20Hz~20k Hz) Built- in stand- by function (with pin(4) set at low, power is turned off.): ISB = 100µA (typ.) Built- in muting function (with pin(1) set at low, power is turned off.) Built- in various protection circuits Protection circuits: Thermal shut down, Over voltage, Out→VCC short, Out→GND short and Out- Out short. Operating supply voltage: VCC (opr) = 9~18V Weight HZIP17- P- 2.00 : 9.8g (typ.) HSIP17- P- 2.00 : 9.8g (typ.) 2004-09-28 Free Datasheet http://.. TA8221AHQ / ALQ Block Diagram TA8221AHQ, TA8221ALQ (GV = 50d B) Cautions And Application Method 1. Voltage gain adjustment (description is made only on the single channel.) This IC has the amplifier construction as shown Fig.1. The pre- amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp (amp 2). Since the input offset is prevented by pre- amp when VCC is set to on, this circuit can remarkably reduce the pop noise. 2004-09-28 Free Datasheet http://.. TA8221AHQ / ALQ The total closed loop gain GV of this IC can be obtained by expression below when the closed loop voltage gain of amp 1 is GV1. G V1 = 20log R1 + (Rf + R2) (d B)...