Datasheet4U Logo Datasheet4U.com

uClamp3381P - 3.3V ESD & Surge Protection

General Description

µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD.

They feature large cross-sectional area junctions for conducting high transient currents.

Key Features

  • extremely good protection characteristics highlighted by high surge current capability (25A, tp=8/20us), low peak ESD clamping voltage, and high ESD withstand voltage (+/-30kV contact per IEC 61000-4-2). Typical dynamic resistance is among the industry’s best at 0.025 Ohms. Each device will protect one data or power line operating at 3.3 Volts. µClamp3381P is in a 2-pin SGP1006N2 package measuring 1.0 x 0.6 x 0.5mm. Leads are spaced at a pitch of 0.65mm and feature a lead-free finish. The combin.

📥 Download Datasheet

Datasheet Details

Part number uClamp3381P
Manufacturer SEMTECH
File Size 482.18 KB
Description 3.3V ESD & Surge Protection
Datasheet download datasheet uClamp3381P Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCLAMP3301D Low Voltage Clamp Semtech Corporation
UCLAMP3301H Low Voltage UClampTM Semtech Corporation
UCLAMP3301P Low Voltage Clamp Semtech Corporation
UCLAMP3304A 4-Line ESD protection Array Semtech Corporation
UCLAMP3305P Low Voltage TVS Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
uClamp3311PQ Low Voltage uClamp TVS
uClamp3311ZV 1-Line ESD & Surge Protection
uClamp3321ZA 3.3V ESD Protection
uClamp0301PQ Low Voltage TVS
uClamp03321PQ 1-Line ESD & Surge Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - µClamp® Description µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. µClamp®3381P features extremely good protection characteristics highlighted by high surge current capability (25A, tp=8/20us), low peak ESD clamping voltage, and high ESD withstand voltage (+/-30kV contact per IEC 61000-4-2). Typical dynamic resistance is among the industry’s best at 0.025 Ohms. Each device will protect one data or power line operating at 3.3 Volts.