RCLAMP0503N
RCLAMP0503N is TVS Array manufactured by SEMTECH.
PROTECTION PRODUCTS
- Rail Clamp® w w w . D a t a S h e e t 4 U . c o m Description
The Rail Clamp series is a family of ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive ponents which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). They are designed for use in applications where board space is at a premium. Each device requires less than 1.5mm2 of PCB area and will protect up to three high speed data lines.
®
Rail Clamp® Low Capacitance TVS Diode Array
Features
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects three I/O lines and a power line Low capacitance: 0.5p F maximum Low clamping voltage Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1510N6 Package Ro HS/WEEE pliant Nominal Dimensions: 1.45 x 1.0 x 0.58 mm Lead Pitch: 0.5mm Lead Finish: Ni Pd Au Marking : Marking Code Packaging : Tape and Reel USB OTG MMC Port Serial ATA Video Port SIM Port PCI Express
The monolithic design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. Each line has a maximum capacitance of 0.5p F to ground. The capacitance of each line is well matched for consistant signal balance. A connection to the TVS is provided for protection of an external voltage bus, such as those found in USB applications. This device is optimized for ESD protection of portable electronics. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15k V air, ±8k V contact discharge). The RClamp0503N is in a 6-pin, Ro HS/WEEE pliant, SLP1510N6 package. It measures 1.45 x 1.0...
