RCLAMP2504P
RCLAMP2504P is 2.5V & 3.3V TVS Arrays manufactured by SEMTECH.
RClamp2504P & RClamp3304P
PROTECTION PRODUCTS
- Rail Clamp® .. Description
Rail Clamp® is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive ponents which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The monolithic design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. Each line has a maximum capacitance of < 0.8p F to ground. The capacitance of each line is well matched for consistant signal balance. This device is optimized for ESD protection of portable electronics. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15k V air, ±8k V contact discharge). The RClamp TM2504P and RClamp TM3304P are constructed using Semtech’s proprietary EPD process technology. The EPD process provides low standoff voltages with significant reductions in leakage current and capacitance over silicon-avalanche diode processes. They feature a true operating voltage of 2.5 volts and 3.3 volts for superior protection. These devices are in a 6-pin, Ro HS/WEEE pliant, SLP1616P6 package measuring 1.6 x 1.6 x 0.58mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free Ni Pd Au.
Rail Clamp® 2.5V & 3.3V TVS Arrays
Features
Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects up to four I/O lines Low capacitance (<0.8p F) for high-speed interfaces Minimal insertion loss to 3.0GHz Low operating voltage: 2.5V and 3.3V Low leakage current and clamping voltage Solid-state silicon-avalanche technology SLP1616P6 package Ro HS/WEEE pliant Nominal Dimensions: 1.6 x 1.6...
