ST8016 Datasheet | Sitronix Technology

FEATURES n n n n n Number of LCD drive outputs: 160 Supply voltage for LCD drive: +15.0 to +30.0 V Supply voltage for the logic system: +2.5 to +5.5 V Low power consumption Low output impedance (Segment mode) n Shift clock frequency - 20 MHz (MAX.): VDD = +5.0 ± 0.5 V - 12 MHz (MAX.): VDD = +3.0 to + 4.5 V - 8 MHz (MAX.): VDD = +2.5 to + 3.0 V n Adopts a data bus system n 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin n Automatic transfer function of an enable signal n Automatic counting function which, in the chip selection mode, causes the internal clock to be stopped by automatically counting 160 bits of input data n Line latch circuits are reset when /DISPOFF active (mon mode) n Shift clock frequency: 4 MHz (MAX.) n Built-in 160-bit bi-directional shift register (divisible into 80 bits x 2) n Available in a single mode (160-bit shift register) or in a dual mode (80-bit shift register x 2) - Y1->Y160 Single mode - Y160->Y1 Single mode - Y1->Y80, Y81->Y160 Dual mode - Y160->Y81, Y80->Y1 Dual mode The above 4 shift directions are pin-selectable n Shift register circuits are reset when /DISPOFF active DESCRIPTION The ST8016 is a 160-output segment/mon driver IC suitable for driving large/medium scale dot matrix LCD panels, and is used in personal puters/work stations. Through the use of SST (Super Slim TCP) technology, it is ideal for substantially decreasing the size of the frame section of the LCD module. The ST8016 is good both as a segment driver and a mon driver, and it can create a low power consuming, high-resolution LCD. .. Ver 2.0 Page 2/28 2008/05/07 PIN CONNECTIONS 186 PIN TCP Y1 Y2 Y3 186 V0R V12R V43R VSS MD FR EIO1 LP /DISPOFF XCK DI7 DI6 DI5 DI4 DI3 DI2 DI1 DI0 EIO2 S/C VDD L/R VSS V43L V12L V0L 1 CHIP SURFACE 161 Y158 Y159 Y160 160 Package: 186-pin TCP (Tape Carrier Package) PIN DESCRIPTION (TCP) PIN NO. 1 ~ 160 161,186 162,185 163,184 165 166 167 168,180 169 ~ 175 176 177 178 179 181 182 164,183...