ST8016T Datasheet | Sitronix Technology

Features Number of LCD drive outputs: 160 Supply voltage for LCD drive: +15.0 to +30.0 V Supply voltage for the logic system: +2.5 to +5.5 V Low power consumption Low output impedance (Segment mode) Shift clock frequency - 20 MHz (MAX.): VDD = +5.0 ± 0.5 V - 15 MHz (MAX.): VDD = +3.0 to + 4.5 V - 12 MHz (MAX.): VDD = +2.5 to + 3.0 V 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin Automatic transfer function of an enable signal Automatic counting function which, in the chip selection mode, causes the internal clock to be stopped by automatically counting 160 bits of input data Line latch circuits are reset when /DISPOFF active (mon mode) Shift clock frequency: 4 MHz (MAX.) Built-in 160-bit bi-directional shift register (divisible into 80 bits x 2) Available in a single mode (160-bit shift register) or in a dual mode (80-bit shift register x 2) - Y1->Y160 Single mode - Y160->Y1 Single mode - Y1->Y80, Y81->Y160 Dual mode - Y160->Y81, Y80->Y1 Dual mode The above 4 shift directions are pin-selectable Shift register circuits are reset when /DISPOFF active n n n n n n n n n DESCRIPTION The ST8016T is a 160-output segment/mon driver IC suitable for driving large/medium scale dot matrix LCD panels, and is used in personal puters/work stations. The ST8016T is good both as a segment driver and a mon driver, and it can create a low power consuming, high-resolution LCD. .. Preliminary Ver 0.12 Page 2/27 2007/10/29 BLOCK DIAGRAM V0R V12R V43R VSS Y1 Y2 Y159 Y160 FR /DISPOFF LEVEL SHIFTER VSS 160-BIT 4-LEVEL DRIVER 160 V43L V12L V0L EIO1 EIO2 ACTIVE CONTROL 160-BIT LEVEL SHIFTER 160 160-BIT LINE LATCH/SHIFT REGISTER 16 8 BIT DATA LATCH LP XCK CONTROL LOGIC 8 L/R MD S/C SP CONVERSION & DATA CONTROL (4 to 8 or 8 to 8) DATA LATCH CONTROL DI0 DI1...