Datasheet4U Logo Datasheet4U.com

OPB916 - Optical Switches

General Description

The OPB916 series of Photologic® photo integrated circuit switches provide optimum flexibility.

Each switch consists of an infrared Light Emitting Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protection.

Key Features

  • Low power consumption.
  • Data rates to 250 kBaud.
  • Choice of two logic states and two electrical outputs.
  • 24” (610 mm) minimum 26 AWG UL listed wires.
  • Slot width 0.20” (5.08 mm).
  • Slot Depth 0.635” (16.13 mm).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPB930 Photologic Slotted Optical Switches OPTEK
OPB930L Photologic Slotted Optical Switches OPTEK
OPB930W Photologic Slotted Optical Switches OPTEK
OPB940 Photologic Slotted Optical Switches OPTEK
OPB940L Photologic Slotted Optical Switches OPTEK

Other Datasheets by TT Electronics

Part Number Description
OPB916BOCZ Optical Switches
OPB916BZ Optical Switches
OPB916IZ Optical Switches
OPB910 Optical Switches
OPB911 Optical Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
OPB916 Series Features:  Low power consumption  Data rates to 250 kBaud  Choice of two logic states and two electrical outputs  24” (610 mm) minimum 26 AWG UL listed wires  Slot width 0.20” (5.08 mm)  Slot Depth 0.635” (16.13 mm) Description: The OPB916 series of Photologic® photo integrated circuit switches provide optimum flexibility. Each switch consists of an infrared Light Emitting Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protection. The deep slot allows for a longer reach of the optical path from the 0.650” (16.5 mm) mounting plane. Internal apertures are 0.010” x .060” (.25 mm x 1.52 mm) for the Photologic’s “S” side and 0.05” x 0.06” (1.27 mm x 1.52 mm) for the LED “E” side.